Insteon Motion and low bat signal

code monkey · 03-05-2010, 12:47 PM

So I was reading up on my insteon motion detectors. It appears that they send a group 3 on signal when the battery is low. This is really handy but I don't know how to link that to hal. The problem is that when you link the motion it only sends a group 1 link. Is there any way that this can be set up by default when you add the device?

I guess this message is more for the AL development team. Right now I have to use the keypad link device to set this device up. When you guys get around to adding the Insteon motion to the official list of supported devices could you please keep this in mind.

Regards,
CM

03-05-2010, 12:47 PM	#1
code monkey Senior Member II Join Date: Sep 2003 Location: Hayward, CA Posts: 915	Insteon Motion and low bat signal So I was reading up on my insteon motion detectors. It appears that they send a group 3 on signal when the battery is low. This is really handy but I don't know how to link that to hal. The problem is that when you link the motion it only sends a group 1 link. Is there any way that this can be set up by default when you add the device? I guess this message is more for the AL development team. Right now I have to use the keypad link device to set this device up. When you guys get around to adding the Insteon motion to the official list of supported devices could you please keep this in mind. Regards, CM __________________ "What if the Hokie Pokie REALLY IS what it's all about?!" O'Shea's Computer Consultants http://www.osheas.com Hal 2000 4.0.65 FutureTouch MyServant 5.0.153 Pure Insteon Setup Windows XPsp3 with all updates installed. Creative Sound Blaster Live Microsoft Security Essentials and Standard Windows Firewall.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)